Flex WaterProof Repair Silicone Tape

$19.99$49.99

FLEX TAP™ is a super strong, rubberized, waterproof tape that can patch, bond, seal and repair virtually everything! It is specially formulated with a thick, flexible, rubberized backing that conforms to any shape or object!

  • PATCH large holes, cracks, gaps and tears!
  • BOND together almost anything!
  • SEAL out water, air and moisture.
  • REPAIR virtually everything!
  • EASY To Use! Just Cut, Peel, Stick & Seal!

Clear
SKU: W00104B01 Category:

Flex WaterProof Repair Silicone Tape Description


FLEX TAPE adhesives may resist bonding to the following surfaces: Plasticized materials, siliconized, greasy, oily, dirty or porous surfaces, waterproof or water-repellent materials and fabrics. It can be applied hot or cold, wet or dry and even underwater!

If you’re looking for the best remedy for holes or leaks, then you’ve come to the right store. WAYPRO brings you the Invincible Tape. The most flexible tape that you ought to have now. Its flexibility and waterproof capability were made from a special formula to enhance a regular sticky tape into an extraordinary and versatile one. You can use the Flex Tape on any object and in any weather condition. That’s how incredible this tape is! Don’t wait for any leaks or holes to show.


Flex Tape – Seal any leak in your home, inside or out!

Use On: PVC, acrylic, metal, steel, copper, aluminum, wood, ceramic, porcelain, tile, glass, rubber, fiberglass, stucco, plaster, stone, drywall, EPDM roofs and so much more!

Excellent For: Roof leaks, gutters, down spouts, boats, kayaks, personal watercrafts, canoes, outdoor equipment, mobile homes, RV’S & campers, PVC & plumbing pipes, sprinkler systems, pools and spas, windows, doors, walls, seams, vents, air ducts, HVAC systems, DIY projects and so much more!



Flex Tape
FLEX TAPE instantly seals out water, air, and moisture to create a super strong, flexible, watertight barrier! It is UV resistant, environmentally friendly, VOC-free and has a wide temperature range.

So Easy To Use! Just Cut, Peel, Stick & Seal!

  • CUT: Leave backing on tape and cut to desired dimension.Use high quality scissors or razor blade when cutting.
  • PEEL: Remove backing and apply to a clean surface.
  • STICK: Press down firmly on a clean surface and allow FLEX TAPE™ to bond. Continue pressing firmly to remove air pockets or bubbles. Once applied, FLEX TAPE™ cannot be repositioned. Adhesion continues to strengthen over time.
  • SEAL: FLEX TAPE™ creates a super strong, waterproof seal.

Specification of Flex WaterProof Repair Silicone Tape

Weight1 lbs
Brand

FLEX TAPE™

Color

White, Black

Type

Adhesive Tape

Size

Large 4, Jumbo 8, Giant 12

Q: Will FLEX TAPE™ instantly stop a leak?

A: Yes, with FLEX TAPE™ you can instantly patch, bond, seal and repair virtually everything!

Q: What colors and sizes does FLEX TAPE™ come in?

A: FLEX TAPE™ comes in white and black.

Q: What sizes does FLEX TAPE™ come in?

A: FLEX TAPE™ comes in:

* Large: 4 inches wide by 5 feet long
* Jumbo: 8 inches wide by 5 feet long
* Giant: 12 inches wide by 10 feet long

Q: What temperature should I apply FLEX TAPE™?

A: FLEX TAPE™ can be applied in a wide range of temperatures, from 20° F to 120° F.

Q: What is the temperature range FLEX TAPE™ can withstand?

A: FLEX TAPE™ will function in extreme temperatures from -70º – 200ºF. At temperatures above 200° F, the extreme heat may cause the adhesive to become gooey and lose its grip. View our Helpful Hints at the bottom of the page.

Q: How do I apply FLEX TAPE™?

A: FLEX TAPE™ is so easy to use! Just cut, peel, stick, and seal!

CUT: Leave backing on tape and cut to desired dimension. Use high quality scissors or razor blade when cutting.

PEEL: Remove backing and apply to a clean surface.

STICK: Press down firmly on a clean surface. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets. Continue pressing firmly and allow to remain on the surface. FLEX TAPE’s bond will increase with time and pressure and in some cases, may need up to 24 hours to reach maximum hold. Once fully bonded, FLEX TAPE™ cannot be repositioned.

SEAL: FLEX TAPE™ creates a super strong, waterproof seal.

Q: How do I cut FLEX TAPE™?

A: FLEX TAPE™ can be cut with a pair of high quality, sharp scissors or a razor blade.

Q: Does FLEX TAPE™ take time to bond?

A: No curing is needed for FLEX TAPE™. FLEX TAPE’s™ adhesion will get stronger over time. For maximum adhesion, View our Helpful Hints at the bottom of the page.

Q: Can I apply FLEX TAPE™ to a wet surface?

A: Yes, FLEX TAPE’s™ adhesive is so strong it can be applied to most wet surfaces….it can even be applied underwater! Just be sure to continue to apply firm pressure.

Q: What surfaces will FLEX TAPE™ adhere to?

A: FLEX TAPE™ will have excellent adhesion on many surfaces including PVC, acrylic, metal, steel, copper, aluminum, wood, ceramic, porcelain, tile, glass, rubber, fiberglass, stucco, plaster, stone, cement, concrete, dry wall, EPDM roofs, some plastics, fabrics, vinyls and so much more! Some materials may take up to 24 hours to reach maximum hold (For surfaces FLEX TAPE™ may resist bonding, View our Helpful Hints at the bottom of the page). Always test before use.

Q: Can I paint over FLEX TAPE™?

A: Most paints will not adhere to FLEX TAPE™. However, Flex Seal® aerosol may be used as a primer to transform the appearance of surfaces where FLEX TAPE™ has been applied. Flex Seal® aerosol comes in 12 vibrant colors and can be purchased at www.flexsealproducts.com.

Q: I’m trying to adhere FLEX TAPE™ to fabric but it’s not sticking. Is there anything I can do to prep the surface?

A: Some customers have found it helpful to first prep a fabric surface with Flex Seal® aerosol, let it dry, and then apply FLEX TAPE™. FLEX TAPE™ can be heated with a standard hair dryer to help the adhesive bond with the fabric. Also, continued firm pressure and time will help increase adhesion.

Q: Can I use FLEX TAPE™ on my radiator hose?

A: No. We do not recommend using FLEX TAPE™ on radiator hoses.

Q: Can I use FLEX TAPE™ on a tank used to hold gas or oil?

A: No. We do not recommend using FLEX TAPE™ on a gas or oil tank.

Q: Can I use FLEX TAPE™ to repair a car or bicycle tire?

A: No. We do not recommend using FLEX TAPE™ to repair tires due to the extreme pressure.

Q: Can I use FLEX TAPE™ on a container that holds water for drinking?

A: FLEX TAPE™ has not been tested on potable drinking water.

Q: What is the maximum pressure FLEX TAPE™ can withstand?

A: The maximum pressure FLEX TAPE™ can withstand will vary based on the substrate and the conditions under which FLEX TAPE™ is applied. It’s always best to test a small area first.

Q: If I’m using FLEX TAPE™ to patch an above ground pool, is it best to apply the FLEX TAPE™ to the inside or the outside of the pool?

A: Both! FLEX TAPE™ forms a super strong bond with itself, so if you’re patching a pool it’s best to first apply FLEX TAPE™ to the interior side of the pool wall and then place a second piece of FLEX TAPE™ to the exterior. Remember that you should cut your FLEX TAPE™ larger than the area of the leak. You do not need to drain the pool prior to applying FLEX TAPE™. FLEX TAPE™ is a temporary, emergency repair and is not meant to be a permanent fix.

Q: Can I use FLEX TAPE™ to repair an air mattress or inflatable?

A: FLEX TAPE™ can be used as a temporary, emergency repair to an air mattress or inflatable. FLEX TAPE’s bond will increase with time and pressure and in some cases, may need up to 24 hours to reach maximum hold. FLEX TAPE™ may not bond with all materials. Always test before use.